FUNTEC Pro Beach Volleyball Posts User Manual
FUNTEC Pro Beach Volleyball Posts
User Manual
*Please note: this manual is for FUNTEC products 111206, 111205, 111204
Security Advice
- This product has been developed for use at competitions and at top-class sports.
- This product must be used in accordance with its designated use which is Volleyball or similar sports.
- Before using this product make sure it has been installed properly and all supports or fittings are firmly tightened.
- This product corresponds with DIN 33957:2012-04 and it has been developed in accordance with DIN EN 1271:2015-01.
- In case the posts have been removed from the sockets please make sure to cover any remaining parts in a way that players won‘t get injured.
Assembly Instructions
- This product has to be assembled with due care by an adult person. We recommend to call upon the help of a second person.
- For this product a level ground is required with the dimensions of at least 14 x 22 m (for the leisure sports) or 18 x 26 m (for competition sports).
- Depending on the way of floor mounting it is required to create foundations according to instructions from this manual.
- Please take no unnecessary risks while handling the equipment and be careful when assembling this product.
Maintenance and Care
- This product does not require regular maintenance work. However, we recommend to check all components for da-mages or deformation regularly. Any damaged parts should be replaced as soon as possible.
- – For cleaning please just use water (with a mild washing-up liquid). Do not use corrosive, solvent or abrasive
cleaning products. - The ideal storage location is dry with a temperature between 10 and 25° C.
Beach Volleyball Posts Pro Beach
City Beach – With Free Standings Sockets / SKU: 111206
Pro Beach net posts made from powder coated special aluminum profile (91 x 91 mm), telescopic height adjustment due to special socket adapters.
With single-arm suspension
allows easy mounting of tension cable.
Rope pulley with triple block combination including a stainless steel carabiner with wire gate (for one-handed use).
Pulley block system is self-balancing to pulling direction
Open tensioning console with horizontal pins for best choice of net cord angle.
Includes an additional clam cleat below for comfortable fine adjustment of tensioning ropes.
Tensioning counter slider with four vertical pins, ideal for pre-tensioning or differing cable lengths.
Pro Beach sockets with easy-to-use locking lever.
Maximum operation comfort with exact lever position (open/closed)
Sockets with T-base for a freestanding installation with square timbers.
Scope of Delivery
Important Notice
Assembly
General information on building a Beach Volleyball court with City Beach sockets:
When building a sand court we suggest to fill up the sand first of all. Afterwards you can just dig in the City Beach ground sockets and set up the net system.
We consider a permanent sand level of 40-50 cm as ideal. It is recommended to fill up the sand a little bit higher at the centers of the playing field halves. It will be moved away towards the court surrounds by the players. Please make sure to create a minimum sand level of 35 cm around the ground sockets for this installation option.
Example: Approximately 250 tons sand are required for a sand court with 14 x 22 m dimensions (for leisure sports) and a sand level of approximately 45 cm. Calculation: volume in m³ x density factor (e.g.: 1,8 – depending on the grain size and the sand quality).
Minimum Sand Level: 35 cm
Required for assembly:
Pressure-treated square timbers, 6 pieces, each 1500 x 88 x 88 mm (maximum dimensions: 1500 x 90 x 90 mm), suitable for permanent ground contact.
Assembly:
Accessories (Sold Separately)
to be continued…